+49(0)89 840797-0 info@ktkgmbh.de

Product finder

The product finder helps you to find the right plastic for your application. Further information can be found on the respective data sheets. Try it out.

We would be happy to advise you: send us an email or give us a call.

Product configurator


Thermal properties:

Long term temperature range (°C):
Short-term temperature range max. (°C):

Elasticity modulus (MPa): The modulus of elasticity describes the stiffness of a material and is determined as the ratio of stress to strain in the starting area of a tensile curve.
Yield stress (MPa): The yield stress is the relative maximum of a tensile curve and is often identical to the tensile strength (depending on the material). In any case, the material is mechanically damaged at the latest when the yield stress is exceeded.
Shore hardness: Shore hardness is one of many hardness testing methods. During the measurement, a pointed steel body is pressed into the sample and the value is read directly after 3s as a dimensionless value on the dial gauge. The more power required, the higher the value


Colors:

Remove all filters

Your selection / 90 results

Material
Properties
ABS
Low water absorption, Excellent electroplatability, Good noise reduction propert...
Acrylglas GS
Low water absorption, High transparency, Very high hardness and stiffness, High ...
Acrylglas XT
Low water absorption, High transparency, Very high hardness and stiffness, High ...
EP GC 201
low water absorption, high electrical and dielectric properties, very high stren...
EP GC 202
low water absorption, high electrical and dielectric properties, very high stren...
EP GC 203
low water absorption, high electrical and dielectric properties, very high stren...
Eslon Acryl PMMA
Antistatic, Good thermoformability, High transparency, Available in abrasion-res...
Eslon PC
Antistatic, Good thermoformability, High transparency, Available in abrasion-res...
Eslon PVC
Antistatic, Good thermoformability, High transparency, Available in abrasion-res...
Eslon PVC Soft
Antistatic, Good thermoformability, High transparency, Very high dimensional sta...
Immo+
Special coating – does not stick to skin or hair, Low weight and easy to clean...
Ortho PE 1000
No shrinkage, Permeable for x-ray radiation, Thermoplastically formable and can ...
Ortho PE 300
Low shrinkage, Permeable for x-ray radiation, Dimensionally stable, Sterilizable...
Ortho PE 500
Low shrinkage, Permeable for x-ray radiation, Welds to itself, Resistant to many...
Ortho PE Corset
Low shrinkage, Permeable for x-ray radiation, Dimensionally stable, Sterilizable...
Ortho PE Soft
Approx. 10% shrinkage, Can be used as shaping and separating material, Thermopla...
Ortho PETG
Thermoplastically formable, Good reshaping properties, Very good deep drawing pr...
Ortho PP
Thermoplastically formable, Permeable for x-ray radiation, Very good deep drawin...
PA12
PA6
High moisture absorption of up to 3 %, Good slip properties, High abrasion resi...
PA6 G
High moisture absorption of up to 3 %, Good slip properties, High abrasion resi...
PA6 GF30
Excellent stiffness, High compressive strength, Very high heat distortion resist...
PA6 GM
High moisture absorption of up to 3 %, Very good noise and vibration damping, G...
PA66
High moisture absorption (up to 2.7 %), Very good slip properties High abrasion ...
PA66 GF30
Excellent stiffness, High compressive strength, Very high heat distortion resist...
PAI Torlon 4203
High strength and stiffness, Very good UV resistance, Extremely low coefficient ...
Show more
Back To Top